Luminex FLEXMAP 3D Hardware User Manual Manuel d'utilisateur télécharger pdf (Page 32)

Pollution degree 2

Operating temperature: 15°C to 30°C (59°F to 86°F)

Operating humidity: 20% to 80%, noncondensing

Shipping and storage temperature: 0 to 50°C (32° F to 122° F)

Shipping and storage humidity: 20% to 80%, noncondensing

Temperature control: Maintains samples using the heater block at a constant temperature from 35°C

to 60°C (95°F to 131°F), +/- 1°C of setpoint.

Altitude: Operation up to 2400 m (7874 ft.) above mean sea level

Automatic transfer of assay protocols and new reagent information into the system using a large

capacity read/write DVD

Automatic sampling from a 96- or 384-well microtiter plate, beginning from any well position

Automatic real-time analysis

Analyzes multiple assay protocols per microtiter plate

Barcode reader entry of sample IDs

System initialization: < 45 minutes (including laser warmup, required software procedures, and weekly

calibration)

System verification: 5 minutes

FLEXMAP 3D warmup: 30 minutes. A system that remains inactive for at least four hours requires a

warm-up to restart the lasers. The system resets the four-hour internal clock after acquiring the

sample, running system calibrators, running system controls, or warming up the instrument.

Produces sound pressure levels below 85 dBA

Electronics

USB 2.0-compatible communications link for fast data transfer

Input voltage range: 100-120 V~, 6.0 A, 50/60 Hz or, 200-240 V~, 3.0 A, 50-60 Hz

Optics

Reporter channel detection: A/D resolution 16 bits

Reporter channel dynamic range: ≥ 4.5 decades of detection (verified with beads dyed with high levels

of organic dyes)

Reporter laser: 532 nm, nominal output 15.0+5%/-0% mW, diode-pumped; mode of operation,

continuous wave (CW); maximum output power 50 mW

Classification laser: 638 nm, nominal output 12.0 to 12.5 mW, diode; mode of operation, continuous

wave (CW); maximum output power 15 mW

Reporter detector: Photomultiplier tube, detection bandwidth of 565 to 585 nm

Technical Overview

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 71 72

Pas de commentaire

Luminex FLEXMAP 3D Hardware User Manual Manuel d'utilisateur Page 32