Luminex BioPlex XYP, LX200 User Manual (supplied by BioRad Manuel d'utilisateur télécharger pdf (Page 12)

Table 1. Array Reader Front and Side Panel Features.

Feature Description

Sample arm The sample arm transports the sample from the 96-well

microtiter plate in the microplate platform to the cuvette.

Upon operation, the carriage drops automatically to the

microtiter plate for sample retrieval.

Sample needle A stainless-steel sample needle acquires sample from

the 96-well plate in the microplate platform.

Cheminert fitting Covered by the sample arm cover, this fitting may be

disconnected to allow replacement of the sample needle

if necessary.

Access doors There are two access doors on the face of the array

reader. The centermost door allows access to the

syringe. The left door provides access to the sheath filter.

Air, waste fluid, Located on the side of the instrument, these connectors

and sheath fluid couple directly to the sheath and waste fluid connectors.

connectors The air connector is green, the sheath connector is blue,

and the waste fluid connector is orange.

The rear panel features of the array reader are shown in Figure 2 and described in Table 2.

Fig. 2. Array reader – rear panel features.

www.bio-rad.com/bioplex/

Power connector

Communication

port P1

Communication

port P2

Air filter and

access door

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 50 51

Pas de commentaire

Luminex BioPlex XYP, LX200 User Manual (supplied by BioRad Manuel d'utilisateur Page 12