Luminex BioPlex XYP, LX200 User Manual (supplied by BioRad Manuel d'utilisateur télécharger pdf (Page 42)

5.3 Technical Support

For technical assistance with the Bio-Plex 200 system, including all hardware and software,

contact your local Bio-Rad office or, in the US, call 1-800-424-6723. All accessories and spare

parts not listed in this document can be ordered similarly, or write to Bio-Rad Laboratories, Inc.,

2000 Alfred Nobel Drive, Hercules, CA 94547.

Section 6

Bio-Plex 200 System Specifications

General Technical Specifications

Environmental conditions

Operating temperature 15–30°C (59–86°F)

Operating humidity 20–80%, noncondensing

Operating altitude Designed to operate at 2,400 m (7,874 ft) above

mean sea level or below

Compensatory range ± 2°C

UL installation category UL Installation Category II, as defined in Annex J of

UL 3101-1

Pollution degree Pollution Degree 2, as defined in Section 3.7.3.2 of

UL 3101-1

Array Reader Specifications

Input voltage range 100–240 V, ~1.5 A, 47–63 Hz

Physical dimensions (W x D x H) 43 x 51 x 23 cm

Weight 23 kg (60 lb)

Lasers

Reporter laser 532 nm, 10 mW

Classification laser 635 nm, 8.5 mW, diode

Fluidics

Sheath flow rate 90 µl/sec

Cuvette 200 µm square flow channel

Sample injection rate 60 µl/min

Electronics

Reporter channel Photomultiplier tube, A/D resolution 14 bits

detection

Classification and Avalanche photodiodes with temperature

doublet discriminator compensation, A/D resolution 12 bits

channel detection

Communications interface RS232 and USB

Signal processing

Measurement resolution 15 bits effective

Processor modes Linear, with logarithmic or linear display option

Dynamic range 70 dB

www.bio-rad.com/bioplex/

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 50 51

Pas de commentaire

Luminex BioPlex XYP, LX200 User Manual (supplied by BioRad Manuel d'utilisateur Page 42