Luminex IS Version 2.3 Manuel d'utilisateur télécharger pdf (Page 11)

PN 89-00002-00-110 Rev. B 1

Luminex 2.3 Software

This manual describes how to use the Luminex IS 2.3 software. It

includes a glossary and information regarding the CSV file setup.

The software user should have a basic familiarity with computers and

Microsoft® Windows®. Commands are often available through

more than one method, such as from the main menu bar, the toolbar,

or on different windows. However, each procedure in this manual

will describe only one method of accessing commands.

This chapter has the following sections:

• Main Window - This section describes the main window of the

Luminex IS 2.3 software, including tabs and commands. Use this

section to become familiar with the main functions of the

software.

• Secondary Windows - This section describes the secondary

windows in the Luminex IS 2.3 software, including the Analysis

Window and Batch Setup Window.

• Commands - This section describes the functions of the

commands in the Luminex IS 2.3 software.

• Procedures - This section describes how to perform tasks using

the Luminex IS 2.3 software.

When using microtiter plates, use plates with wells that will hold at

least 185 µL (the extra 25 µL from the sample, plus an extra 160 µL

that is dispensed back into the well following acquisition).

Main Window The Luminex IS 2.3 software starts automatically when you log into

Windows.

When the first software User window opens, the Main window is

open, with the Home tab displayed, as shown in Figure 1

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 119 120

Pas de commentaire

Luminex IS Version 2.3 Manuel d'utilisateur Page 11