Luminex IS Version 2.3 Manuel d'utilisateur télécharger pdf (Page 71)

xMAP Technology Luminex 2.3 Software

PN 89-00002-00-110 Rev. B 61

 To assign sample dilution factors:

1. On the File menu, click New Batch. The Open Template dialog

box opens.

2. Select the desired template and click Select. The Luminex

Batch Setup dialog box opens. See Figure 34.

3. Select the item that uses the dilution factor that you are setting.

You cannot change any item that is grayed out or locked into the

command list.

Figure 34 Luminex Batch Setup for Dilution

4. To change the dilution factor, click the Dil. Factor field. The

white background indicates that you can enter text. Enter each

dilution factor as a decimal, not as a ratio.

5. Click Finish. The system saves the information you entered.

Create a New

Advanced Batch

Use New Advanced Batch to acquire data without creating a

template. It writes raw data results to a simple csv file format. You

can define parameters for samples, gates, regions, events, on-plate

and off-plate commands. This feature does not store the results in the

Luminex System database or allow you to perform data analysis on

acquired batches. The Luminex analyzer uses only the 100 region

bead map. However, in the Acquisition Detail tab, you can view the

data for 25, 50, 64, and 100 regions and save the data to a csv file.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 119 120

Pas de commentaire

Luminex IS Version 2.3 Manuel d'utilisateur Page 71