Luminex FLEXMAP 3D Hardware User Manual Manuel d'utilisateur télécharger pdf (Page 31)

Uninterruptible Power Supply (UPS) or Surge Protector

Luminex recommends using either an uninterruptible power supply (UPS) or a surge

protector to protect your system from power outages. Use a UPS that provides 1300 watts for

at least 45 minutes. Select a surge protector that fits your requirements with regard to

electrical environment, endurance, suppressed voltage rating, and method of protection. The

surge protector requires three outlets and a minimum rating of 1500 watts. Either piece of

equipment should be listed by Underwriters Laboratory (UL) or a similar listing body, certified

by Canadian Standards Association (CSA), and marked Conformité Europeénne (CE) for

nondomestic use.

Printer

Use a printer compatible with Microsoft

Windows XP SP3.

Barcode Labels

Use Code 128 barcode label type when scanning barcode labels into the system.

Vortex

Use VWR product number 58816-12, with a speed range of 0 to 3200 rpm, or equivalent.

Bath Sonicator

Use Cole-Parmer

product number 08849-00, with an operating frequency of 55 kHz, or

equivalent.

Specifications

The Luminex

FLEXMAP 3D

system is designed to fit a series of standards for speed,

accuracy, sensitivity, and capacity. The following topics provide the specifications for the

Luminex FLEXMAP 3D system.

CAUTION: Read and observe specifications carefully.

General

Indoor use only

Physical dimensions: 58.4 cm (23 inches) W x 65.3 cm (25.7 inches deep, including the required 1.25

inches for proper cooling) D x 54.7 cm (18.0 inches) H. Additional space required for the arm, monitor,

keyboard, mouse and optional barcode scanner does not exceed 64.8 cm (25.5 inches) W by 61 cm

(24.0 inches) D.

Weight: up to 91 kg (200 lbs), including the instrument, monitor arm, monitor and accessories such as

the keyboard, mouse, and barcode scanner.

Installation Category II

FLEXMAP 3D

Hardware User Manual

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 71 72

Pas de commentaire

Luminex FLEXMAP 3D Hardware User Manual Manuel d'utilisateur Page 31