Luminex IS Version 2.3 Manuel d'utilisateur Page 43

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 120
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 42
xMAP Technology Luminex 2.3 Software
PN 89-00002-00-110 Rev. B 33
Self Diagnostics Performs a self-diagnostics to see if the Luminex 200 analyzer and
all system operations are functioning correctly. Self-Diagnostics tests
these functions:
Flash memory test
Microcontroller RAM test
Nonvolatile memory test
DSP program CRC test
DSP capture test
High voltage module
Channel backgrounds test
Pressurization test
Actuator test
Syringe pump test
Backflush valve test
Debubbler valve test
Show Bead After selecting an entry from the drop-down list, sets the histogram
to show events for only one beadset [bead set number], <all gated>
events within the gate, or <all> events inside and outside the gate.
Select <all> (default) before setting the gate.
Single Step Selecting this option on the toolbar pauses the system in between
each command or sample acquisition within a batch.
Skip [wells] Enables you to deliberately bypass specific wells during batch
acquisition.
Soak Prevents salt crystals from forming in the probe due to air exposure.
Soaking the probe replaces sheath fluid in the probe with water. You
should perform the soak function at the end of each day. The system
uses at least 250
µL of distilled water.
Start Analysis Opens the Open Batch dialog box, from which you select a batch to
analyze. Once you select the batch, the Analysis window opens.
Start (Plate) This command initiates data acquisition on New Advanced Batches
and New Batches using system templates. During acquisition, the
system draws sample from the microtiter plate for processing.
Statistics This command enables you to display selected statistics for sample
data. There are eleven different statistics: %CV, Trimmed %CV,
Count, Trimmed Count, Mean, Trimmed Mean, Median, Trimmed
Peak, Peak, Trimmed Std Dev, and StdDev.
Vue de la page 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 119 120

Commentaires sur ces manuels

Pas de commentaire